The DP-8000 evaluation board based on Xilinx XC7Z020-2CLG400I provides features common to many embedded processing systems, including DDR3、Flash、USB、HDMI、ETH、SD、CAN、UART、JTAG 、GPIO and so on.

DNNDK details >>


If you are interested in our DNNDK evaluation board (DP-8000), please contact us by sending email to dnndk@deephi.tech.

DP-8000 Board Features

  • ZYNQ XC7Z020-2CLG400I device
  • 1GB DDR3 component memory(two 256Mb x 16 devices)
  • 4Gb NAND Flash memory
  • USB 2.0 connector
  • HDMI 1.3 Transmitter connector
  • 10/100/1000 tri-mode Ethernet with RJ-45 connector
  • SD connector
  • CAN bus connector
  • UART connector(the board includes UART-to-USB PHY, the connector is USB2.0 connector)
  • JTAG connector
  • Clock sources(33.333MHz single-ended clock to PS,50MHz single-ended clock to PL)
  • DC-JACK power sockets
  • Power on/off switch
  • GPIO
    • - Eight PL used LEDs
    • - One dual row GPIO header
    • - Two FFC headers
    • - Two DIP switches for boot mode selecting
  • Reset Pushbuttons
    • - SRST_B PS Reset Pushbutton
    • - POR_B PS Reset Pushbutton
  • Boot mode
    • - JTAG
    • - SD
    • - NAND FLASH